HAZE HZB 12v range has a 12 year design life and is ideally suited for temperature controlled installations with low to medium outage rates.
HAZE HZB 12v batteries use a special formation process and high quality materials to suit the requirements of UPS, DC Power and other standby power applications.
.
Nominal Voltage Nominal Capacity Design Life
Operating Temperature Grid alloy
Plates Separator Active material Case and cover Charge Voltage
Electrolyte Venting Valve
Terminal Torque setting Cables
12 Volts
38.8Ah (C20)
12 Years
-20 °C to 50 °C
Calcium / Tin lead alloy
Flat Pasted
Absorbant Glass Mat
Very high purity lead
ABS (VO on request)
Float 2.25 – 2.30 VPC @25 °C Cycling See Haze Cyclic charging profile Max ripple 0.05C (A)
Sulphuric acid Analytical grade purity
EPDM Rubber 1.5 to 2 psi (10.5 – 14 KPa) release pressure. Resealing at 1 psi (7 KPa)
Insert 14mm Dia M6 thread. Epoxy sealed by extended mechanical paths The recommended torque value for all types is 5-7 Nm
Connectors, cables, terminal covers on request.
Contact HAZE at or
