Specifications
4, 6 & 12 Volt Nominal Voltage
5 Year design life
-20 °C to 50 °C (Recommended Operating temperature)
Calcium / Tin lead Grid Alloy
Flat Pasted Plates
Absorbent Glass Mat Separator
Active Material – High purity lead
Case and Cover ABS (VO on request)
Charge Voltage Float 2.27 – 2.30 VPC @20 °C Cycling – Not intended for cyclic use
Max. 2.4 VPC Max ripple 0.05C (A)
Electrolyte Sulphuric acid Low impurity
Venting Valve EPDM Rubber 1.5 to 2 psi (10.5 – 14 KPa) release pressure. Resealing at 1 psi (7 KPa)
| Dimensions | Metric mm/kg | Imperial inches/lbs | Insert Terminal | ||||||||
| Model No. | Length | Width | Height | Inc tabs | Kg | Length | Width | Height | Inc tabs | Lbs | |
| HSC6-4.5 | 70 | 48 | 101 | 106 | 0.71 | 2.76 | 1.89 | 3.98 | 4.17 | 1.6 | T1 |
| HSC6-7.5 | 150 | 34 | 94 | 100 | 1.15 | 5.91 | 1.34 | 3.70 | 3.94 | 2.5 | T1 |
| HSC6-10 | 151 | 50 | 93.5 | 99.5 | 1.60 | 5.94 | 1.97 | 3.68 | 3.92 | 3.5 | T1 |
| HSC6-12 | 151 | 50 | 93.5 | 99.5 | 1.80 | 5.94 | 1.97 | 3.68 | 3.92 | 4.0 | T2 |
| HSC12-5 | 90 | 70 | 101 | 107 | 1.62 | 3.54 | 2.76 | 3.98 | 4.21 | 3.6 | T1 |
| HSC12-7 | 151 | 65 | 94 | 99 | 2.00 | 5.94 | 2.56 | 3.70 | 3.90 | 4.4 | T1 |
| HSC12-7.5 | 151 | 65 | 94 | 99 | 2.20 | 5.94 | 2.56 | 3.70 | 3.90 | 4.9 | T2 |
| HSC12-10 | 151 | 65 | 110 | 116 | 2.80 | 5.94 | 2.56 | 4.33 | 4.57 | 6.2 | T2 |
| HSC12-12 | 150 | 97 | 94 | 99 | 3.50 | 5.91 | 3.82 | 3.70 | 3.90 | 7.7 | T2 |
| HSC12-18 | 181 | 76 | 167 | n/a | 5.00 | 7.13 | 2.99 | 6.57 | n/a | 11.1 | Insert |
| HSC12-26 | 165 | 174.5 | 125 | n/a | 8.00 | 6.50 | 6.87 | 4.92 | n/a | 17.7 | Insert |
| HSC12-33 | 193.5 | 130 | 166.5 | n/a | 9.00 | 7.62 | 5.12 | 6.56 | n/a | 19.9 | Insert |
| HSC12-44 | 198 | 167 | 157 | n/a | 12.20 | 7.80 | 6.57 | 6.18 | n/a | 27.0 | Insert |
